Entra
Superj

Superj

Superj

Superj ha contestado en Pilotos traseros LED

Hi, I hope that someone can help me. As already said, I have ordered the four tail lights (two inner and two outer lights) about 9 weeks ago. After a few days I received only 3 (two outer and only the left inner light). Since it took me too long, I decided to only install the outer tail lights, and wait for the remaining right hand tail light. Today the garage told me that they don't know when the remaining light can be delivered. There is no delivery date from Seat available. Do you probably know if there is a shortage on the tail lights in Spain? If no, would it be possible for someone to buy the remaining light for me, and send it to Austria? For sure I will pay for the light and shipping, but I don't want to wait another three months. Thanks for your help.

Superj

Superj ha contestado en Pilotos traseros LED

Here is a picture.

I am sorry, but the quality is not the best.

Posted Image

Este mensaje incluye imágenes subidas por Superj a la web Imageshack.us hace más de 12 años.
El 22 de Febrero de 2011 ImageShack cambió sus politicas, impidiendo que los usuarios que no tuvieran cuenta en su sitio pudieran ver las imágenes subidas en sus servidores.
Para evitar problemas similares en el futuro, por favor subid siempre vuestras fotos y archivos directamente al Club Seat Exeo.
Superj

Superj ha contestado en Pilotos traseros LED

Hi guys, I would like to tell you that it is possible to do the coding with a special software and cable. I did it for the outer LEDs on the weekend. Right now I have a mix of LEDs (outboard) and standard lights (inboard). The reason is that there is a delivery problem from Seat for the inboard LEDs. Please don't ask me about the cable. It is an old diagnostic cable from BMW (it is sealed, I cannot open it) and a very old software originally for vw cars. If someone is in Vienna, I can could help with the coding. 8)

Superj

Superj ha contestado en Pilotos traseros LED

Hello again, Thanks for your warm welcome. I have no pictures yet, but can give you a few details about the car. I have the 2.0 TDI 143 in Magico Negro. It is the Reference model, which is the basic version available. It does not include all nice features like the Style or Sport version. But I have the Electric Package 1, which includes the Lights sensor (auto-lights), Auto dimming rear view mirror, Acoustic windscreen, Coming home headlight function, Rear parking sensors, Rain sensor (auto-wipers) and the Electrically folding mirrors. This is quite ok. After I got the car I retrofitted, I ordered and retrofitted some parts from the Audi dealer by myself. First one was the Ambient light pack, which was very easy. Then the plastic covers which cover the big hole, where the battery and brake fluid reservoir is and another one which goes over the windscreen washer fluid reservoir on the driver side of the engine compartment. I did it because it is an extra protection against rain and dirt. The parts are the same as of an Audi A4, and cost only €60 or so. Since I have a plastic steering wheel (without Multi Function) installed, I wanted to change it to a leather steering wheel (€360,- from the dealer). So I ordered the official Seat Accessory Steering Wheel, but they delivered it without the Multifunction Switches. Now I have 2 holes and have to wait for an official answer from Seat in Spain on what they decide (if I get them for free or not). The problem is that the two switches (left and right) cost additional €300,-. This would make the total cost for the Steering Wheel €760,- which is not acceptable. No one told me in advance that I have to order them seperately. And the last project is, what you are right now working on. The new LEDs. I hope that someone will find out on how to change the EEPROM, because here no one from the SEAT dealers know how to change the parameters. They all say, no, it cannot be installed. Thanks SJ

Superj

Superj ha contestado en Pilotos traseros LED

Hello Guys, I hope that someone can help me. Unfortunately I do only speak English, and do only understand some words in Spanish. I also have a Seat Exeo (2009) and would like to install the new 'Pilotos LED'. On page 15 I have seen that there is a 'Dirrecion VAS $09' in order to change some parameters within the EEPROM. Could you tell me if I can do this change with the VCDS Software, or if I need a different software or hardware to do it. Thanks SJ

No te lo vas a creer... ¡Usamos cookies!
Y aunque solo las tengamos para mantener tu usuario logeado y ver cuanta gente nos visita, tenemos que molestaros con este mensaje.
Si quieres saber más puedes leer nuestra Política de cookies.