Nissan JUKE | Barcelona | 159
En ocasiones cuando se pretende limpiar el parabrisas o luna frontal o tambien para cambiar/ reemplazar las gomas (WIPER), nos damos cuenta que el limpia está escondido y nos cuesta levantarlo.
que se hace en este caso? si no tienes ni idea levantas el capo para no rayarlo. pero existe una solucion mas practica...
en posicion de servicio el limpia se ubica en el centro de la luna y comodamente se puede limpiar las lunas o reemplazar. adjunto un video.
en la seccion DRIVER CONTROLS hace referencia al capitulo WIPER& WASHER (WW)
Extraigo el texto en ingles acerca de la posicion de servicio del wiper frontal del manual de servicio JUKE 2011. que es a lo que se refiere Andres. mas tarde hago el video para que quede mas claro para todos.
FRONT WIPER SERVICE POSITION OPERATION
• Front wiper operates in LO, stops, and then stays in lock back position when front washer switch is turned
ON while ignition switch is OFF.
• BCM transmits front wiper service position signal via CAN communication according to the front wiper service
position function operating conditions.
Operation conditions of front wiper service position function
- Turn ignition switch OFF (within 1 minutes)
- Front wiper switch ON (0.4 second or more)
• Front wiper operates at LO and then stops when IPDM E/R detects front wiper service position signal.
• Front wiper service position function is cancelled when front wiper washer switch is turned ON within 1
minute after turning ignition switch OFF. Front wiper srevice position function when front wiper switch (INT,
LO, HI, MIST or WASHER) is turned ON within 1 minute or more after turning ignition switch OFF.
NOTE:
Front wiper does not operate even if front wiper switch (INT, LO, or HI) is ON when ignition switch is turned ON while front wiper is stopped according to front wiper service position function.
100%
